Eppendorf epBlue with MultiCon Bedienungsanleitung

ualh MultiConEN)manual epBlue™ with MultiConSoftware manualSoftware-Version 40.1

Operating instructionsepBlue™ with MultiConEnglish (EN)101.2.2 Danger levels1.3 Symbols usedDANGER Will lead to severe injuries or death.WARNING Can l

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)1008.3.2 Creating a labware combination based on existing labwar

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)101Abb. 8-10: Edit Properties windowFig. 8-10: Edit Properties w

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)1028.3.3 Equipping the racks, thermoracks and Reservoir Rack mod

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)103Abb. 8-12: Rack and vessel as labware combinationFig. 8-12: R

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)104Proceed as follows:Prerequisites• The ReservoirRack modules w

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)1058.4.2 Requesting labware definitions Eppendorf creates defini

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)1068.5.4 PCR platesLabware types in epBlue: Plates > PCR.8.5.

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)1078.5.10 Reservoir Rack Module TCFirst, equip a Reservoir Rack

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)1088.5.13 ThermoadapterLabware types in epBlue: Adapter > The

epBlue simulation - Simulating applicationsepBlue™ with MultiConEnglish (EN)1099 epBlue simulation - Simulating applicationsThis chapter describes how

Operating instructionsepBlue™ with MultiConEnglish (EN)111.4 Abbreviations usedBCRBar code readerCSVComma Separated ValueDNADeoxyribonucleic acid DWPD

epBlue simulation - Simulating applicationsepBlue™ with MultiConEnglish (EN)1109.1.2 Controlling the simulationAbb. 9-1: Simulation windowFig. 9-1: Si

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11110 epBlue ID - Working with ID trackingThis chapter describes the basics of ID

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11210.1.2 Input lists and result listsInput list• ID list with information on sou

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11310.3 Reading IDs into epBlueIDs can be entered manually when starting an appli

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11410.4 Managing ID lists Abb. 10-1: ID List Management windowFig. 10-1: ID List

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11510.4.2 Filtering and sorting ID listsYou can filter ID lists by date, user, fo

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11610.4.4 Export ID listsUsers of the Admin Lab, User Level 2 and Administrator u

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)11710.5 Making the basic settings for the epBlue IDIn order to make the basic set

epBlue ID - Working with ID trackingepBlue™ with MultiConEnglish (EN)118

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)11911 epBlue settings - Checking components and ma

Operating instructionsepBlue™ with MultiConEnglish (EN)121.5 GlossaryAAdministratorUser who has the rights to administrate epBlue.ApplicationProgram f

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)12011.3 Tool interlockThe Tool interlock function

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)12111.3.1 Lock the tool1. Slide the tool into the

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)12211.5 GripperThe Gripper function can be used to

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)12311.6 Temperature control unit XThe Temperature

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)12411.7 ThermomixerYou can use this function to ch

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)1251. Define the speed and temperature in the Para

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)126The current status will be displayed in the Sta

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)12711.9 UV lampThe UV lamp is used to decontaminat

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)128The tool holder moves. The UV lamp will be swit

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)129Abb. 11-11: Filter symbol in the status areaFig

Operating instructionsepBlue™ with MultiConEnglish (EN)13epBlueSoftware for creating and administering applications and labware. The epMotion is contr

epBlue settings - Checking components and making the basic settingsepBlue™ with MultiConEnglish (EN)130

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)13112 epBlue settings - Creating and managing usersThis chapter describe

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)132Administrator• Importing, exporting and printing data• Saving and rec

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)13312.1.3 User accounts12.1.3.1 OverviewThe Account > Overview tab di

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)13412.1.3.2 Creating a user accountCreate a user account for each user.

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)13512.1.3.3 Editing a user accountAbb. 12-4: Account > Edit tabFig. 1

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)1364. epBlue asks whether you would like to delete the user account.To d

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)137Abb. 12-5: Changing a passwordFig. 12-5: Changing a passwordThe Accou

epBlue settings - Creating and managing usersepBlue™ with MultiConEnglish (EN)138

epBlue Settings - Saving data and creating print templatesepBlue™ with MultiConEnglish (EN)13913 epBlue Settings - Saving data and creating print temp

Operating instructionsepBlue™ with MultiConEnglish (EN)14LLab administratorUser who has the rights to administrate applications and labware.LabwareRac

epBlue Settings - Saving data and creating print templatesepBlue™ with MultiConEnglish (EN)140Proceed as follows:Prerequisites• epBlue is started.• Yo

epBlue Settings - Saving data and creating print templatesepBlue™ with MultiConEnglish (EN)14113.1.3 Restoring the databaseYou can import your backup

epBlue Settings - Saving data and creating print templatesepBlue™ with MultiConEnglish (EN)14213.2 Changing the device nameThe Device name window cont

epBlue Settings - Saving data and creating print templatesepBlue™ with MultiConEnglish (EN)14313.3 Print templatesPrint templates can define how your

epBlue Settings - Saving data and creating print templatesepBlue™ with MultiConEnglish (EN)14413.3.1 Create print templatesPrerequisites• You are logg

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)14514 epBlue - Software error messagesThis chapter contains an overview of the softwa

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1460x0C02 Volume too small for this tool Volume to be dispensed is too small for the

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1470x128E Carrier: steps lost in y • Carrier collision.• Carrier mechanics out of ord

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1480x129A Tip too small Reagent Transfer: Used tip is too small.  Use a larger tip.

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1490x12B8 Temperature unit in location C2 too hot for labware (temperature command in

Operating instructionsepBlue™ with MultiConEnglish (EN)15SSafeRackRack with ep.T.I.P.S. Motion pipette tips. The SafeRack features a partition that pr

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1500x12D1 Parameter conflict: Elution volume too large for destination tube or well O

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1510x12F7 Waiting for thermomixer The procedure is waiting for the thermomixer. Wait

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1520x150D Optical sensor: Plate could not be found in location: ... Optical sensor: R

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1530x1515 Tool cannot be used for rack in location ... Distance between tip cones of

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1540x151E Detected volume is out of detection range ... Normally a system/hardware er

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1550x152A Gripper could not be found See error message.  Provide the gripper on the

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1560x1701 Liquid volume too large for vessel in location:... Total volume supplied in

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1570x190E The following tool is not selected in the labware file window: ... Edit mod

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1580x1911 The following labware has been changed, so the pattern no longer fits: xxx

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1590x1A10 8-channel tool cannot be used for this source rack Edit mode/parameter in c

Operating instructionsepBlue™ with MultiConEnglish (EN)16

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1600x1A17 Invalid entry for speed aspiration (0.2 ... 110) Edit mode/parameter in tra

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1610x1A22, 0x1A32, 0x1A42, 0x1A52No source or destination selected Edit mode/paramete

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1620x1A78 Number of tubes not supported Edit mode/pattern: One or more Modules have 3

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1630x1AB1 Invalid entry for seconds (0 ... 59) Edit mode/parameter in command Vacuum:

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1640x1C0D You must clear old pattern first Press "new pattern" Edit mode/pa

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1650x1C15 Pattern too complex Edit mode/pattern: The pattern algorithm cannot handle

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1660x1C20 Pattern for sample transfer: only one position per sample on source Edit mo

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1670x2026 Bottom tolerance too small Bottom tolerance too small.  Use a bigger valu

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1680x210D Source rack not defined Parameter Source was not edited in the application.

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1690x211D Mixing cycles in source not defined Parameter No. of Cycles in a mix proced

Product descriptionepBlue™ with MultiConEnglish (EN)172 Product description2.1 FeaturesThe epBlue software is used to control the epMotion. epBlue con

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1700x2122 Parameter conflict: mixing volume in source too small for this tool The Vol

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1710x2127 Mixing volume in destination not defined Parameter Volume in a mix procedur

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1720x212D Parameter conflict: 8-channel tool cannot be used for this source rack Edit

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1730x2135 Location for destination not defined Edit mode/parameter in command Transpo

epBlue - Software error messagesepBlue™ with MultiConEnglish (EN)1740x2171 Parameter conflict: Multidispense mode is not allowed when elution from fil

Ordering informationepBlue™ with MultiConEnglish (EN)17515 Ordering information15.1 AccessoriesOrder no. (International)DescriptionLH assistant5075 00

IndexepBlue™ with MultiConEnglish (EN)176IndexAApplicationChange name ...86Change properties...

IndexepBlue™ with MultiConEnglish (EN)177HHEPA ...11HEPA air filter...

IndexepBlue™ with MultiConEnglish (EN)178RRackEquipping...102ReservoirRackEquipping with Reservoir

Product descriptionepBlue™ with MultiConEnglish (EN)182.1.2 AssistantsAssistants are programs for a specific application. Assistants are optionally av

Evaluate your manualGive us your feedback.www.eppendorf.com/manualfeedbackYour local distributor: www.eppendorf.com/contactEppendorf AG · 22331 Hambur

OperationepBlue™ with MultiConEnglish (EN)193 Operation3.1 Starting and exiting epBlue3.1.1 Starting epBluePrerequisites• The device does not show any

5075 900.866-01/122013 Copyright© 2013 Eppendorf AG, Hamburg. No part of this publication may be reproduced without the prior permission of the copyr

OperationepBlue™ with MultiConEnglish (EN)20Abb. 3-1: epBlue start screenFig. 3-1: epBlue start screen3.1.4 Logging off as a user You can only log off

OperationepBlue™ with MultiConEnglish (EN)213.1.5 Exiting epBlue and switching off MultiCon 1. In the Eppendorf menu, select Close.2. When the program

OperationepBlue™ with MultiConEnglish (EN)22Switch the automatic display of the screen key pad on and off. In the File menu, select the Show keyboard

OperationepBlue™ with MultiConEnglish (EN)23Abb. 3-4: Help drop-down menuFig. 3-4: Help drop-down menu3.2.4 Status areaThe status area is located in t

OperationepBlue™ with MultiConEnglish (EN)24

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)254 epBlue Application Runner - Carrying out the applicationT

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)264.2 Preparing the application run4.2.1 Selecting the device

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)274.2.2 Entering the sample quantityAbb. 4-3: Process control

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)284.2.4 Placing the labware on the epMotion worktable  Posit

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)291. Set the functions of the optical sensor.2. Activate ID t

Table of contentsepBlue™ with MultiConEnglish (EN)3Table of contents1 Operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)305. Confirm your entry with the OK button.6. Press the Next

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)314.2.7 Entering the filling level of the labware4.2.7.1 Chec

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)324.2.7.2 Entering the filling level manuallyIf the Detect vo

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)33Tab. 4-1: Meaning of the columns in the Volume tableProceed

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)344.3 Starting the applicationPrerequisites• The labware is p

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)354.5 Ending the applicationWhen the application run is finis

epBlue Application Runner - Carrying out the applicationepBlue™ with MultiConEnglish (EN)36

epBlue LogViewer - Managing logsepBlue™ with MultiConEnglish (EN)375 epBlue LogViewer - Managing logsThe chapter also describes how to view and print

epBlue LogViewer - Managing logsepBlue™ with MultiConEnglish (EN)385.2 Saving the protocol as a PDF filePrerequisites1. Click on the symbol.The prin

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)396 epBlue Application Editor - Creating and editing app

Table of contentsepBlue™ with MultiConEnglish (EN)46 epBlue Application Editor - Creating and editing applications. . . . . . . . . . . . . . . . . .

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)406.2.2 Creating an empty applicationAbb. 6-2: Start scr

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)416.2.4 Saving an application To save an application, c

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)42Prerequisites• Labware combinations have been created

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)43• EP_DWP_2000• EP_DWP_1000• EP_DWP_500• EP_MTP_384• EP

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)446.2.6 Defining the application parameters of the labwa

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)456.2.8 Defining proceduresA procedure is a defined sequ

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)46Prerequisites• The application is open (see p. 25).• L

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)476.2.9 Checking an application1. Click on the symbol

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)486.3.1 Sample transfer command Various transfer comman

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)496.3.1.1 Sample transfer > Parameter command Abb. 6-

Table of contentsepBlue™ with MultiConEnglish (EN)58 epBlue Labware Editor - Creating and managing labware . . . . . . . . . . . . . . . . . . . . . .

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)506.3.1.2 Sample transfer > Options command Abb. 6-9:

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)516.3.1.3 Sample transfer > Mix command The Mix comma

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)526.3.1.4 Sample transfer > Liquid types Liquid typ

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)53Protein Water with 1 % albumin (10 g/L), 0.01 % Triton

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)546.3.1.5 Changing the liquid typeAbb. 6-11: Sample tran

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)55 Enter the dispensing speed of the liquid in the Disp

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)566.3.1.6 Testing the changed liquid typePrerequisites•

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)576.3.3 Dilute command The Dilute command is used to c

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)586.3.3.1 Example of a dilution seriesThis example expla

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)59Transferring diluent to the destination labware2. Patt

Table of contentsepBlue™ with MultiConEnglish (EN)610 epBlue ID - Working with ID tracking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)606.3.4 Pool command The Pool command can be used to c

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)616.3.6 Comment command Abb. 6-15: Comment command Fig.

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)626.3.7 Exchange command Abb. 6-16: Exchange commandFi

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)63If the Magnetic separation command is executed when th

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)646.3.10 Number of samples command The Number of sample

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)65• Before the Dilute command: number of samples to be d

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)666.3.12 Thermomixer command The Thermomixer command ca

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)67Tab. 6-2: Maximum speed for labware on the thermomixe

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)686.3.13 Vacuum command The Vacuum command is used to c

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)696.3.13.1 Transporting the Vac Lid with the gripperUse

Table of contentsepBlue™ with MultiConEnglish (EN)713 epBlue Settings - Saving data and creating print templates. . . . . . . . . . . . . . . . . . .

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)706.3.15 User intervention command The User interventio

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)71Abb. 6-25: Wait windowFig. 6-25: Wait window6.3.17 Imp

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)726.3.17.1 Creating a CSV fileYou can create and edit CS

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)73The tools for the CSV file are coded using numbers:– 1

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)746.3.17.2 Importing a CSV filePrerequisites• CSV file a

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)757. Define settings used in the CSV file in the Options

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)766.4 PatternFor the pattern, enter the source position

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)776.4.1 Menu bar in the Edit Pattern windowAbb. 6-28: Me

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)787. Select the next source position in the source labwa

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)796.4.3 Defining irregular patternsIrregular patterns ca

Table of contentsepBlue™ with MultiConEnglish (EN)8

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)806.5 Optical sensorIf the optical sensor is switched of

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)816.5.1.1 Setting application parameters for the Detect

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)826.5.1.2 Setting the run parameters for the Detect volu

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)836.5.2 Detect tips You can only use the Detect tips fun

epBlue Application Editor - Creating and editing applicationsepBlue™ with MultiConEnglish (EN)84

epBlue Application Editor - Managing applications and foldersepBlue™ with MultiConEnglish (EN)857 epBlue Application Editor - Managing applications an

epBlue Application Editor - Managing applications and foldersepBlue™ with MultiConEnglish (EN)867.2 Copying and deleting applications7.2.1 Copying app

epBlue Application Editor - Managing applications and foldersepBlue™ with MultiConEnglish (EN)87Abb. 7-3: Edit Properties windowFig. 7-3: Edit Propert

epBlue Application Editor - Managing applications and foldersepBlue™ with MultiConEnglish (EN)88Abb. 7-4: Import Application windowFig. 7-4: Import Ap

epBlue Application Editor - Managing applications and foldersepBlue™ with MultiConEnglish (EN)897.4.2 Exporting applicationsYou can export application

Operating instructionsepBlue™ with MultiConEnglish (EN)91 Operating instructions1.1 Using this manualYour epMotion operating manual consists of hardwa

epBlue Application Editor - Managing applications and foldersepBlue™ with MultiConEnglish (EN)907.5 Saving an application as a PDF fileYou can save an

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)918 epBlue Labware Editor - Creating and managing labwareThis ch

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)928.2 Managing labware8.2.1 Menu barAbb. 8-1: Menu bar in the La

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)938.2.2 Deactivating and activating labwareTo keep a clear overv

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)94Abb. 8-3: Import labware windowFig. 8-3: Import labware window

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)958.2.5 Export labwareYou can export labware files in order to u

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)968.2.6 Viewing the properties of the labwareProceed as follows:

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)973. Change the bottom tolerance in the Bottom Tolerance field.4

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)988.3 Creating labware combinationsBefore you create an applicat

epBlue Labware Editor - Creating and managing labwareepBlue™ with MultiConEnglish (EN)991. Click on the symbol in the menu bar.The Create new labwar