Eppendorf InjectMan 4 Bedienungsanleitung Seite 78
- Seite / 100
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Operation
InjectMan
®
4
English (EN)
78
6.20.2 Execute the Selftest function
1. Select Selftest and confirm with Enter.
2. Confirm Execute with Enter.
The screen for the Selftest function appears.
3. Execute Selftest with Start.
The motors move up to the limit stops.
4. Terminate Selftest with Stop.
6.21 Resetting parameters to the factory settings
6.21.1 Perform reset
Reset all parameters to the factory settings.
1. Keep the home key pressed.
2. Switch on the device at the mains power switch.
The screen for GENERAL RESET appears.
3. Execute the function with Yes.
• All parameters are now reset to the factory settings.
6.21.2 Carrying out a reset in the menu
Prerequisites
• An application has been selected.
1. Press the menu key.
2. Select the Function menu.
3. Press Enter.
4. Select User default and confirm with Execute.
• All parameters are now reset to the factory settings.
6.22 Remote computer control of the InjectMan 4
You can control the InjectMan 4 by means of a terminal program remotely via computer.
Computer control by means of a terminal program is only recommended for certain
applications and is not described in this operating manual. A special operating manual for
this functionality is available at the following Internet address: www.eppendorf.com
.
CAUTION! Risk of crushing between the modules
The modules automatically move in all spatial axes.
Do not reach into the movement range of the modules.
Eppendorf does not provide any support for controlling the InjectMan 4 by
means of a terminal program.
- InjectMan 1
- Table of contents 3
- 2.1 Delivery package 9
- 2.1.1 Tools 9
- 2.1.2 Accessories 9
- 2.2 Features 9
- 2 Product description 9
- 2.3 Main illustration 10
- 2.3.1 Motor module 11
- 2.3.2 Control board 12
- Abb. 2-4:Control board - rear 13
- 2.4 Control panel 14
- 2.5.1 Dynamic range 15
- 2.5 Joystick 15
- 2.5.3 Joystick key functions 16
- 2.6 Speed ranges 17
- 3.1 Intended use 18
- 3.2 Warnings for intended use 18
- 4.3 Mounting overview 21
- 4.3.1 Module (X, Y, Z) 22
- 4.3.2 Z-module holder 23
- 4.3.3 Slider 23
- 4.3.4 Angle head 24
- 4.3.5 Swivel joint 25
- 4.4 Mounting the motor module 25
- 4.4.1 Mounting the Z-module 26
- 4.4.2 Mounting the Y-module 26
- 4.4.3 Mounting the X-module 27
- 4.4.4 Mounting the angle head 28
- 4.6.1 Inserting Femtotips 30
- 4.8 Aligning the motor module 31
- 4.8.1 Aligning the height 31
- 4.8.2 Aligning the depth 31
- 4.8.3 Aligning the width 32
- 4.8.4 Aligning the angle head 32
- 4.9.1 Microscope and adapter 32
- 4.9.2 Motor module 33
- 4.9.3 Angle head 33
- 4.13.1 First set-up wizard 40
- 4.14.4 Connecting two devices 44
- 5 Software 45
- 5.1 Display 45
- 5.1.1 Application display 45
- 5.1.2 Display of coordinates 46
- 5.1.3 Menu display 47
- 5.2 Applications 47
- 5.2.1 Application parameter 48
- 5.2.3 Application – ICSI 49
- 5.3 Main menu 51
- Save with Enter 52
- 6.3 Defining the start screen 54
- 6.4 Replacing the capillary 54
- 6.5 Changing the sample 56
- 6.6 Changing the speed range 56
- 6.7 Capillary positions 57
- 6.7.1 Saving a position 57
- Press the joystick key 58
- 6.8 Vertical limits 59
- Upper Limit 60
- 6.9 Horizontal limit 61
- 6.10 Speed function 62
- 6.11 Inject function 63
- 6.12 Step injection function 65
- 6.13 Home function 66
- 6.13.5 Setting the offset 67
- 6.14 Clean function 68
- 6.15 PiezoXpert function 70
- 6.16 Installation function 71
- 6.16.4 Module parameters 72
- 6.17 Function function 72
- 6.17.4 Executing User default 73
- 6.18 Softkeys function 74
- 6.18.2 Executing Softkeys 75
- 6.18.3 Executing Joystick key 76
- 6.19 Change appl. function 76
- 6.20 Service function 77
- 6.21.1 Perform reset 78
- 7 Troubleshooting 79
- 7.1 General errors 79
- 7.1.1 Motor module 79
- 7.1.2 Capillary 79
- 7.1.4 Joystick 80
- 7.1.5 Software and parameters 80
- 7.2 Error messages 80
- 7.2.1 Warnings 80
- 7.2.2 Error 81
- 8 Maintenance 82
- 8.1 Replacing fuses 82
- 8.2 Cleaning 82
- 8.3 Service and maintenance 83
- 9 Technical data 84
- 9.1 Power supply 85
- 9.2 Interfaces 85
- 9.3 Ambient conditions 85
- 10.1 Storage 86
- 10.3 Transport 86
- 10.4 Disposal 87
- 11 Ordering Information 88
- 11.1 InjectMan 4 88
- 11.3 Tools for InjectMan 4 89
- 11.4 Microscope adapter 89
- 11.7 Capillaries 91
- 11.9 CellTram and accessories 92
- 11.10 FemtoJet 92
- 11.11 FemtoJet express 93
- 11.13 PiezoXpert 94
- Evaluate your manual 100
- Give us your feedback 100
Verwandte Produkte und Handbücher für Ausrüstung Eppendorf InjectMan 4
(60 Seiten)
(16 Seiten)
(16 Seiten)
(58 Seiten)
(16 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.033 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern