Eppendorf InjectMan 4 Bedienungsanleitung Seite 79
- Seite / 100
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Troubleshooting
InjectMan
®
4
English (EN)
79
7 Troubleshooting
7.1 General errors
7.1.1 Motor module
7.1.2 Capillary
7.1.3 Control board and display
Symptom/message Cause Remedy
Motor axes move in the
wrong direction or do
not match joystick
movement.
• Motor module mounted
incorrectly.
• Incorrect installation
parameters entered.
• Direction of movement of
axis inverted.
Compare the installation
parameters with the
structure of the motor
module.
Check the orientation and
structure of the modules.
Check the connections of
the modules at the control
board.
Cancel the inversion of the
axis.
Symptom/message Cause Remedy
Capillary moves too
fast or too slow.
• Radius of working range
incorrectly set.
Set the radius using the
selection dial or in the Speed
menu.
• Incorrect acceleration
factor.
In the Installation menu, set
the value for the Dyn-factor
parameter.
Capillary only moves to
the side or vertically.
• Y-axis is disabled.
The Y off function disabled.
Capillary does not
move down far
enough.
•The Z-axis Limit function is
active.
• Capillary is incorrectly
adjusted.
Deactivate the Z-axis Limit
function.
Readjust the capillary.
Symptom/message Cause Remedy
Device does not
respond to keystroke
when Home function is
active.
• Function is active.
Press the home key again.
The capillary moves down.
Press the Back manual
softkey.
Move the joystick.
- InjectMan 1
- Table of contents 3
- 2.1 Delivery package 9
- 2.1.1 Tools 9
- 2.1.2 Accessories 9
- 2.2 Features 9
- 2 Product description 9
- 2.3 Main illustration 10
- 2.3.1 Motor module 11
- 2.3.2 Control board 12
- Abb. 2-4:Control board - rear 13
- 2.4 Control panel 14
- 2.5.1 Dynamic range 15
- 2.5 Joystick 15
- 2.5.3 Joystick key functions 16
- 2.6 Speed ranges 17
- 3.1 Intended use 18
- 3.2 Warnings for intended use 18
- 4.3 Mounting overview 21
- 4.3.1 Module (X, Y, Z) 22
- 4.3.2 Z-module holder 23
- 4.3.3 Slider 23
- 4.3.4 Angle head 24
- 4.3.5 Swivel joint 25
- 4.4 Mounting the motor module 25
- 4.4.1 Mounting the Z-module 26
- 4.4.2 Mounting the Y-module 26
- 4.4.3 Mounting the X-module 27
- 4.4.4 Mounting the angle head 28
- 4.6.1 Inserting Femtotips 30
- 4.8 Aligning the motor module 31
- 4.8.1 Aligning the height 31
- 4.8.2 Aligning the depth 31
- 4.8.3 Aligning the width 32
- 4.8.4 Aligning the angle head 32
- 4.9.1 Microscope and adapter 32
- 4.9.2 Motor module 33
- 4.9.3 Angle head 33
- 4.13.1 First set-up wizard 40
- 4.14.4 Connecting two devices 44
- 5 Software 45
- 5.1 Display 45
- 5.1.1 Application display 45
- 5.1.2 Display of coordinates 46
- 5.1.3 Menu display 47
- 5.2 Applications 47
- 5.2.1 Application parameter 48
- 5.2.3 Application – ICSI 49
- 5.3 Main menu 51
- Save with Enter 52
- 6.3 Defining the start screen 54
- 6.4 Replacing the capillary 54
- 6.5 Changing the sample 56
- 6.6 Changing the speed range 56
- 6.7 Capillary positions 57
- 6.7.1 Saving a position 57
- Press the joystick key 58
- 6.8 Vertical limits 59
- Upper Limit 60
- 6.9 Horizontal limit 61
- 6.10 Speed function 62
- 6.11 Inject function 63
- 6.12 Step injection function 65
- 6.13 Home function 66
- 6.13.5 Setting the offset 67
- 6.14 Clean function 68
- 6.15 PiezoXpert function 70
- 6.16 Installation function 71
- 6.16.4 Module parameters 72
- 6.17 Function function 72
- 6.17.4 Executing User default 73
- 6.18 Softkeys function 74
- 6.18.2 Executing Softkeys 75
- 6.18.3 Executing Joystick key 76
- 6.19 Change appl. function 76
- 6.20 Service function 77
- 6.21.1 Perform reset 78
- 7 Troubleshooting 79
- 7.1 General errors 79
- 7.1.1 Motor module 79
- 7.1.2 Capillary 79
- 7.1.4 Joystick 80
- 7.1.5 Software and parameters 80
- 7.2 Error messages 80
- 7.2.1 Warnings 80
- 7.2.2 Error 81
- 8 Maintenance 82
- 8.1 Replacing fuses 82
- 8.2 Cleaning 82
- 8.3 Service and maintenance 83
- 9 Technical data 84
- 9.1 Power supply 85
- 9.2 Interfaces 85
- 9.3 Ambient conditions 85
- 10.1 Storage 86
- 10.3 Transport 86
- 10.4 Disposal 87
- 11 Ordering Information 88
- 11.1 InjectMan 4 88
- 11.3 Tools for InjectMan 4 89
- 11.4 Microscope adapter 89
- 11.7 Capillaries 91
- 11.9 CellTram and accessories 92
- 11.10 FemtoJet 92
- 11.11 FemtoJet express 93
- 11.13 PiezoXpert 94
- Evaluate your manual 100
- Give us your feedback 100
Verwandte Produkte und Handbücher für Ausrüstung Eppendorf InjectMan 4
(60 Seiten)
(16 Seiten)
(16 Seiten)
(58 Seiten)
(16 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.027 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern