Eppendorf InjectMan 4 Bedienungsanleitung Seite 80
- Seite / 100
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Troubleshooting
InjectMan
®
4
English (EN)
80
7.1.4 Joystick
7.1.5 Software and parameters
7.2 Error messages
7.2.1 Warnings
The display does not
show anything or the
device cannot be
activated although the
device is connected.
• The power cable or power
plug is loose.
• The device is switched off.
Check the power cable or
the power plug.
Switch the device on.
Symptom/message Cause Remedy
Outer movement range
of the joystick does not
work.
• Outer movement range is
deactivated.
In the Installation menu, set
the value for Dyn-mode to
ON.
Symptom/message Cause Remedy
Parameters are not
accessible for certain
operations.
–
Enter parameters again.
Carry out a reset and reset
all parameters to the works
settings.
Readjust device.
Symptom/message Cause Remedy
WARNING 1 • FemtoJet is not connected.
Disconnect the data cable to
the FemtoJet and connect it
again.
Switch on the FemtoJet.
WARNING 3 • X-module is not connected.
Switch off the device.
Connect the plug of the
X-module to the control
board and tighten.
Switch the device on.
WARNING 4 • Y-module is not connected.
Switch off the device.
Connect the plug of the
Y-module to the control
board and tighten.
Switch the device on.
Symptom/message Cause Remedy
- InjectMan 1
- Table of contents 3
- 2.1 Delivery package 9
- 2.1.1 Tools 9
- 2.1.2 Accessories 9
- 2.2 Features 9
- 2 Product description 9
- 2.3 Main illustration 10
- 2.3.1 Motor module 11
- 2.3.2 Control board 12
- Abb. 2-4:Control board - rear 13
- 2.4 Control panel 14
- 2.5.1 Dynamic range 15
- 2.5 Joystick 15
- 2.5.3 Joystick key functions 16
- 2.6 Speed ranges 17
- 3.1 Intended use 18
- 3.2 Warnings for intended use 18
- 4.3 Mounting overview 21
- 4.3.1 Module (X, Y, Z) 22
- 4.3.2 Z-module holder 23
- 4.3.3 Slider 23
- 4.3.4 Angle head 24
- 4.3.5 Swivel joint 25
- 4.4 Mounting the motor module 25
- 4.4.1 Mounting the Z-module 26
- 4.4.2 Mounting the Y-module 26
- 4.4.3 Mounting the X-module 27
- 4.4.4 Mounting the angle head 28
- 4.6.1 Inserting Femtotips 30
- 4.8 Aligning the motor module 31
- 4.8.1 Aligning the height 31
- 4.8.2 Aligning the depth 31
- 4.8.3 Aligning the width 32
- 4.8.4 Aligning the angle head 32
- 4.9.1 Microscope and adapter 32
- 4.9.2 Motor module 33
- 4.9.3 Angle head 33
- 4.13.1 First set-up wizard 40
- 4.14.4 Connecting two devices 44
- 5 Software 45
- 5.1 Display 45
- 5.1.1 Application display 45
- 5.1.2 Display of coordinates 46
- 5.1.3 Menu display 47
- 5.2 Applications 47
- 5.2.1 Application parameter 48
- 5.2.3 Application – ICSI 49
- 5.3 Main menu 51
- Save with Enter 52
- 6.3 Defining the start screen 54
- 6.4 Replacing the capillary 54
- 6.5 Changing the sample 56
- 6.6 Changing the speed range 56
- 6.7 Capillary positions 57
- 6.7.1 Saving a position 57
- Press the joystick key 58
- 6.8 Vertical limits 59
- Upper Limit 60
- 6.9 Horizontal limit 61
- 6.10 Speed function 62
- 6.11 Inject function 63
- 6.12 Step injection function 65
- 6.13 Home function 66
- 6.13.5 Setting the offset 67
- 6.14 Clean function 68
- 6.15 PiezoXpert function 70
- 6.16 Installation function 71
- 6.16.4 Module parameters 72
- 6.17 Function function 72
- 6.17.4 Executing User default 73
- 6.18 Softkeys function 74
- 6.18.2 Executing Softkeys 75
- 6.18.3 Executing Joystick key 76
- 6.19 Change appl. function 76
- 6.20 Service function 77
- 6.21.1 Perform reset 78
- 7 Troubleshooting 79
- 7.1 General errors 79
- 7.1.1 Motor module 79
- 7.1.2 Capillary 79
- 7.1.4 Joystick 80
- 7.1.5 Software and parameters 80
- 7.2 Error messages 80
- 7.2.1 Warnings 80
- 7.2.2 Error 81
- 8 Maintenance 82
- 8.1 Replacing fuses 82
- 8.2 Cleaning 82
- 8.3 Service and maintenance 83
- 9 Technical data 84
- 9.1 Power supply 85
- 9.2 Interfaces 85
- 9.3 Ambient conditions 85
- 10.1 Storage 86
- 10.3 Transport 86
- 10.4 Disposal 87
- 11 Ordering Information 88
- 11.1 InjectMan 4 88
- 11.3 Tools for InjectMan 4 89
- 11.4 Microscope adapter 89
- 11.7 Capillaries 91
- 11.9 CellTram and accessories 92
- 11.10 FemtoJet 92
- 11.11 FemtoJet express 93
- 11.13 PiezoXpert 94
- Evaluate your manual 100
- Give us your feedback 100
Verwandte Produkte und Handbücher für Ausrüstung Eppendorf InjectMan 4
(60 Seiten)
(16 Seiten)
(16 Seiten)
(58 Seiten)
(16 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.025 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern